Login - Become a member

TaylorMade R Series Produce Out

Forums home -> Post 3D Art -> TaylorMade R Series Produce Out

post reply

TaylorMade R Series Produce Out 
By tongjame on Feb 15, 2013 07:27 AM
Unless you’ve been in a coma for the last couple of months, the announcement of new woods from TaylorMade, specifically the R1 Driver and RBZ Stage 2 Series woods came as anything but a surprise.

Every R1 driver comes pre-set at 10 degrees, but TaylorMade hopes to solve the loft problem by allowing you to adjust the taylormade r1 driver down to as little as 8 degrees or up to as much as 12 degrees. A small dial on the hosel allows you to change the loft in half-degree increments.

TaylorMade coming out with a set of irons to match the taylormade r11 driver and Fairways like they did with R7 & R9, that is it,the Taylormade r11 irons. It's also fairly safe to state the Japanese Marketplace may be the very first to pronounce R11 irons.

The r11 irons are definitely not blades or a set of tour only clubs. Designed with more forgiveness in mind they appeal to a much larger audience. The TaylorMade R11 irons' short irons have a shallow undercut channel between the face and rear to control feel and CG location, the mid-irons have a moderate undercut, and the long irons have a progressively larger undercut that pulls weight farther back from the face for added forgiveness.

With a black clubface and a white non glare crown, which is highly visible in the shade and reduces glare in the sun, the superb taylormade r11 fairway produces out of this world results on the golf course.


The taylormade r11 fairway wood brings new technology, innovation, and aesthetics to its already successful line of TaylorMade clubs. With it's distinctive white crown and black face, the R11 is one of the easiest fairway woods to align at address.

Have a good golfint time!
Reply with quote

post reply

Page 1 of 1 Go to page: 1
Subscribe to RSS
Follow us on Twitter

 

Copyright © 1996-2010 Raphael Benedet - Contact Us